Nickel Alloy Weld Neck Flanges

Nickel Alloy Weld Neck Flanges Manufacturer

 Apexia Metal is Nickel Alloy Weld Neck Flanges, Nickel WNRF Flange. WNRTJ Flanges Nickel Alloy, Nickel RFWN Flanges, Nickel Raised Face Weld Neck Flange. Nickel Ring Type Joint Weld Neck Flanges, Nickel Weld Neck Flange Manufacturer

Nickel Alloy Weld Neck Flanges Specification

Size chart 1/2 “(15 NB) to 48” (1200NB) DN10 ~ DN5000

Nickel Weld Neck Flanges ANSI / ASME B16.5, B16.47 Series An and B, B16.48, BS4504, BS 10. EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, Flanges EN Flange GOST. ASME / ANSI B16.5 / 16.36 / 16.47A / 16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092

Nickel Alloy WNRF Flange Pressure Rating ANSI Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS

ASTM B564 Nickel Alloy Weld Neck Flanges. Pressure Calculation in DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64

Weld neck flange ASME SB 564 5K, 10K, 16K 20K, 30K, 40K, 63K

Nickel Weld Neck Flange ASME SB564 UNI 6Bar 10Bar 16Bar 25Bar 40Bar

B564 Weld Neck Flange EN 6Bar 10Bar 16Bar 25Bar 40Bar

Oil black paint coating, anti-rust paint, galvanized, transparent yellow, hot and cold galvanized

EN 10204 / 3.1B test certificates

Raw materials certificate

100% X-ray Test Report

External inspection report, then in

ASME SB564M Nickel Alloy Weld Neck Flange Production Technique Forged. Heat Treated and Machined

B564 Weld Neck Flange Connection Type / Flange Face Type Raised Face (RF), Ring Type Joint (RTJ). Flat Face (FF), Large Male-Female (LMF), Weld Neck Face (LJF ). Small male-female (SMF)), Small tongue, Large tongue, and groove, Groove

Single plan

According to your drawing

AS, ANSI, BS, DIN, and JIS

15 NB (1/2 “) to 200 NB (8”)

Equivalent and reducing configurations

Nickel Alloy Weld Neck Flanges Manufacturer in Mumbai

ASME B564 Weld Neck Flange Test Direct Compression Spectrograph, Hydrostatic Testing Machine. X-Beam Identifier, UI Ultrasonic Flaw Indicator, Magnetic Molecule Locator

Nickel Alloy Weld Neck Flange Equipment ASTM B564 Crimping Machine, Bending Machine. Pushing Machine, Electric Tilting Machine, Sand Impact Machine and then on

Nickel Alloy Weld Neck Flange Origin India / Western Europe / Japan / USA / Korean

Nickel Alloy Weld Neck Flange Producer

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE then en

ASTM B564 weld neck flange: – BS flange, EN flange, API 6A flange, ANSI flange, ASME flange. DIN flange, EN1092-1 flange, UNI flange, JIS / KS flange, BS4504 flange. GB flange, AWWA C207 flange, GOST Flange, PSI Flange

B.S: BS4504, BS3293, BS1560, BS10

AS 2129: Table D; Table E; Table H

ANSI B16.5, ANSI B16.47 Series An and B, MSS SP44, ASA, API-605, AWWA, Custom Drawings

ANSI: ANSI B16.5, ANSI B16.47 (API605), MSS SP44, ANSI B16.36, ANSI B16.48

ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48

American standard (ANSI)

German (DIN)

English standard (BS)

Noise: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656. DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636. DIN 2637, DIN 2638 ASTM B564 200 Nickel Flanges

Nickel Alloy Weld Neck Flanges, Nickel Alloy Weld Neck Flanges Manufacturer, Nickel Alloy Weld Neck Flanges Manufacturer in Mumbai, Nickel Alloy Weld Neck Flanges Manufacturer in Maharastra, Nickel Alloy Weld Neck Flanges Manufacturer in India

Nickel Alloy Weld Neck Flanges Manufacturer in Maharastra

The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503. SABS1123; NFE29203; UNI2276

ASME SB564M Uses and Application of Nickel Weld Neck Flanges Bitumen Improvers.

Main oil processing plants.

Atomic force (generally consistent).

Petrochemicals and acids.

Nickel Alloy Weld Neck Flanges Export to Ireland. Singapore, Indonesia, Ukraine, Saudi Arabia, Spain. Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, onwards

Determinations: ASTM B564 / ASME SB564

Measurements: ANSI / ASME B16.5, B 16.47 Series An and B, B16.48, BS4504, BS 10, EN-1092, DIN, then onwards

Standard: ANSI flanges, ASME Flanges, BS Flanges, DIN flanges, EN flanges, then forward

Size: 1/4 “- 48”

Class / Pressure: 150 #, 300 #, 600 #, 900 #, 1500 #, 2500 #, PN6, PN10, PN16, PN25, PN40, PN64 and then on

Spine face type: level face (FF), Raised Face (RF), ring type joint (RTJ)

Suitable for low temperature and pressure factor applications. the nickel wear flange is placed in line and fillet. after which these spines are welded from both inside and outside. The high nickel content consumer safe wear flange is developed in such a way that it is everything. but a space unto itself with the coordination of the external width of the line through which a line can pass.

Flawless steel welded long neck flanges are known for their thermal properties. plus they provide excellent performance at cryogenic temperatures. with durability up to 450 degrees F. Solvents, formic acids, and acids. acid anhydride, chlorine are used wet gas, hypochlorites, fixed chlorine, and corrosive phosphoric. Nickel Weld Long Neck Flanges are impervious to destructive conditions. the most noticeably diminishing synthetic substances, provide an extraordinary assurance for biting antacids.

Monel long neck welded flanges have extraordinary mechanical properties at freezing temperatures. they are often used in temperatures up to 1000 degrees F and. their softening point is 2370-2460 ° F.

Or its highlights such as opposition To erosion. ideal finish, toughness, and dimensional accuracy. these flanges are used in various application industries such as the petrochemical industry. synthetic industry, power industry, agricultural water system, and onwards.

Inconel Long Weld-Neck rods due to their high heat fastness are often. used in assist temperatures ranging from cryogenic to 2200 degrees F (982 degrees C). The high blend substance of Inconel’s LWN spines powers.

all extremely destructive conditions except a good variety. These long neck flanges are available for welding in various evaluations of pressure factors. measurements, sizes, grades. onwards, and also in remade sizes to meet the needs of various customers at the most reasonable costs.

Nickel Alloy Weld Neck Flanges, Nickel Alloy Weld Neck Flanges Manufacturer, Nickel Alloy Weld Neck Flanges Manufacturer in Mumbai, Nickel Alloy Weld Neck Flanges Manufacturer in Maharastra, Nickel Alloy Weld Neck Flanges Manufacturer in India
Nickel Alloy Weld Neck Flanges Manufacturer in India

Different Types of ANSI B16.5 Long Neck Welded Flanges

304 / 304L Treated Steel Long Weld Neck Flanges

Long neck flanges for welding SS 310 / 310S

316 / 316L Hardened Steel Long Neck Welded Flanges

321 / 321H Hardened Steel Long Neck Weld Flanges

SS 347 Long Weld Neck Flanges

Monel 400 Long Weld Neck Flanges

Cu-Ni 70/30 (C71500) Long neck flanges for welding

Duplex Steel Long Weld Neck Flanges

UNS S31803 Duplex Steel Long Neck Weld Flanges

Duplex Steel UNS S32205 Long Weld Neck Flanges

UNS S32750 Very Duplex Long Weld Neck Flanges

UNS S32950 Very Duplex Long Weld Neck Flanges

Hastelloy C276 Long Neck Weld Flanges

Long neck flanges for welding Cu-Ni 90/10 (C70600)

About

We are one of the leading manufacturers of optimum quality Pipes & Pipe Fittings. Their high tensile strength, seamless finish and resistance to corrosion, make these pipes highly demanded.

Register Office

Office No. 14, New Hira Building, 1st Parsiwada Lane, Girgaon, Mumbai – 400004, Maharashtra, India

Contact

(+91) 7977916074
(+91) 9167472806
[email protected]
[email protected]

Copyright 2021 © Apexia Metal – All Rights Reserved || Developed & Maintained by Adsense Networks