INCONEL 800 ROUND BAR

INCONEL 800 ROUND BAR MANUFACTURER

The Apexia Metal Is Inconel 800 round bar is iron, nickel, and chromium-based compound. This Inconel 800H hot-ended round bar is known. for its moderate elasticity with great protection. against oxidation and carburization also at elevated temperatures.

The stock of Incoloy 800 wide round bars and bars. Incoloy 800ht level bars manufacturers, see UNS N08811 cold drawn bars list, supplier

supplier of Alloy 800 bars, Incoloy Alloy 800HT bar, Incoloy UNS N08800 bright bar

UNS N08811 Cold drawn bar is particularly valuable in applications. where the blend will be used for higher temperature hardware. within the petrochemical business. This is often because the mix used in the production of Incoloy 800 Round Bar. and Rods do not frame the brittle sigma stage even after quite a long time. of opening at elevated temperature, which can rise to approximately 1200 ° F.

The presence of nickel content within the UNS N08800 bar material. offers excellent protection against stress-related consumption breakage of chloride particles. which is therefore another important element of the amalgam 800 h round bar. nickel.

Chromium carbide precipitation within the Inconel 800HT rod can occur. within the range of around 1400ºF to 1000ºF, so these parts must cool rapidly through this temperature range.

The 800H Combo Hex Bar is often reinforced within a temperature. range of around 1800ºF to 1900ºF. Following which the UNS N08800 bar should ideally be quenched. with water after being tempered to keep away from carbide precipitation.

INCONEL 800 ROUND BAR  , INCONEL 800 ROUND BAR MANUFACTURER, INCONEL 800 ROUND BAR MANUFACTURER IN INDIA, INCONEL 800 ROUND BAR  SUPPLIER, INCONEL 800 ROUND BAR  SUPPLIER IN INDIA

INCONEL 800 ROUND BAR MANUFACTURER IN INDIA

What is the Inconel 800 round bar?

Nickel 800H Alloy Rod is a solution heat treated. at a temperature of 2100 ° F. This controlled. and heat-treated carbon variant of Nickel 800 Bars accompanies. an improvement in its elevated temperature properties. Inconel 800 round bar suppliers. that the compound has further developed the qualities of drag resistance. and stress cracking within the temperature range that is between 1100 ° F and. approximately 1800 ° F.

ASTM B408 Incoloy 800 round bar specification

Incoloy Grade 800 – UNS N08800 – ALLOY 800HT AMS 5766 (32 Ni / 21 Cr) – ALLOY 800H / HT AMS 5766 (32 Ni / 21 Cr)

Specification ASTM B408 UNS N08800, AMS 5766

ASTM, ASME, API, GB, AISI, DIN, EN, SUS, UNS standard

combination 800 round bar size Diameter: 3- ~ 800mm

800 Incoloy Hex Bar size 2-100mm A / F

Inconel Alloy 800 Flat Bar Size Thickness: 2 – 100mm

Width: 10 to 500 mm

800 Incoloy square bar size 4 to 100 mm

Inconel 800 Angle Bar Size (in mm) 3 * 20 * 20 ~ 12 * 100 * 100

ASTM B408 incoloy 800 Section 3.0 to 12.0 mm thick

Inconel WERKSTOFF NR. 1.4876 Channel bar (in mm) Segment from 80 x 40 to 150 x 75; 5.0 to 6.0 thick

800HT Nickel Alloy Hollow Bar (in mm) 32 OD x 16 ID to 250 OD x 200 ID)

1.4876 Incoloy 800 Billet Size 1/2 “to 495mm diameter

Incoloy Rectangles ASTM B408 800 Size 33 x 30mm to 295 x 1066mm

800 Incoloy Round Bar Finish Cold drawn (splendid). centerless grinding, hot rolled, smooth turning, peeled. cut moved edge, reinforced hot moved, rough turned, bright. polished, ground, centerless ground, and black

Amalgam Inconel 800 Round Bar Surface Glossy. Hot Rolled Pickled, Cold Drawn, Sandblasted Finished, Polished, Hairline

round bar Inconel 800 Condition Hardened and tempered, quenched

800 Incoloy Bar Technique Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod

Inconel 800 Din 1.4876 Round bar tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or according to customer needs

UNS N08800 Incoloy Bar Processing Bar cutting up to 650mm

 

INCONEL 800 ROUND BAR  , INCONEL 800 ROUND BAR MANUFACTURER, INCONEL 800 ROUND BAR MANUFACTURER IN INDIA, INCONEL 800 ROUND BAR  SUPPLIER, INCONEL 800 ROUND BAR  SUPPLIER IN INDIA

INCONEL 800 ROUND BAR SUPPLIER

Our Inconel Alloy 800 round bar conforms to NACE MR0175 / ISO 15156

Inconel 800 round bar suppliers

We can create Inconel 800 round bars in back frames and shapes:

pole

Level bars

Round

Square

Channel bars

Cableway

Grid

Precision ground bars

Rings

Empty

Round rod

Rectangular bar

Triangle

Hex (A / F)

Square shape

Semicircular bars

Chained

Billet

Profiles

I / H bars

Manufacturing

Ingot

INCONEL 800 ROUND BAR SUPPLIER IN INDIA

Different types of round bar Incoloy 800 1,487

800HT Incoloy N08811 Forged Bar Incoloy 800 Din 1.4876 Polished Bar

1.4876 Alloy 800 Hex Bar Inconel 800 Bright Hollow Bar

Incoloy 800 Din 1.4876 Annealed Rectangular Bar Incoloy 800 Nickel Polished Hex Bar

Nickel Alloy Incoloy 800 Rectangular Bar 1.4876 Black Incoloy 800 Threaded Bar

Nickel Alloy Incoloy 800 Hex Bar Polished Nickel Alloy 800H Incoloy Hex Bar

1.4876 Incoloy 800 Hex Bar Incoloy 800H Alloy Threaded Bar

Composite Square Bar 800 Inconel Polished Incoloy 800 Bright Hot Rolled Bar

Incoloy DIN 1.4876 Hex Bars, Incoloy 800 Rod. Incoloy 800 UNS N08800 Bar, Incoloy 800h Round Bar, Alloy 800ht Bar Distributor

Composite 800 round bar, Inconel 800 round bar. Incoloy 800 cold-finished bars and Incoloy Alloy 800 bright bar, ASTM B408 UNS N08811 bar

Incoloy 800 can be nickel, iron, and chromium-based compound. The Incoloy 800 rod is not only known for its great strength. but also for its fantastic protection against oxidation. even as carburetion when presented at high temperatures. There are two additional amalgams to be obtained from the Incoloy 800. Incoloy 800H and Incoloy 800HT.

This setting was controlled so that the carbon substance could settle anywhere between 0.05 and 0.10%. The high nickel content within ASTM B408 UNS N08811 makes these compounds. exceptionally impervious to both chloride stress-related erosion failure. and sigma stage precipitation weakness.

The overall consumption clogging of the Incoloy 800h round bar is phenomenal. Within the hardening condition of the arrangement. Incoloy 800 round bar has unsurpassed jerk and stresses rupture properties.

The 800ht combination bar is used in applications. where temperatures can rise to 1100 ° F. The Incoloy 800 round bar will not weaken. even after prolonged periods of open heating within the temperature. range of 1200 – 1600 ° F where they become numerous hardened steels. fragile.

Inconel 800 round bar has fantastic virus forming qualities. that are generally attributed to nickel and chromium compounds. In the sense that Inconel 800 is cold-shaped. it is anything but a noticeably wavy surface called the “orange stripe.” ASTM B408 UNS N08811 are often welded using the normal methods used on tempered steels.

Both alloy steel amalgams are comparative. except for the higher grade of carbon in the 800H compound. In addition, the expansion of up to 1.20% of both aluminum and titanium in the 800HT amalgam. Science measurements of the Incoloy 800HT ensure ideal thermal properties. which could be used for higher temperature primary applications.

The Inconel 800 Round Bar was the first of those amalgams to stand out next to the lookout. and had become marginally the Incoloy 800H by controlling the carbon substance added. to the mix.

The UNS N08811 cold drawn bar is particularly useful in applications. where the composite material is to be used for high-temperature hardware. within the petrochemical business. This is often because of the compound used in the assembly. of the round bar and Incoloy 800 rods does not shape. the brittle sigma stage even after quite a long time of opening at elevated temperature. which can rise to approximately 1200 ° F.

The presence of nickel content within the UNS N08800 bar material. offers great protection against stress-related consumption breakage of chloride particles. which is therefore another important element of the Amalgam 800 h round bar. nickel.

Industry Names Alloy 800 Inconel 800 Nickel 800 Inconel 800H / HTIncoloy 800

Material Exotic special steel

Details AMS 5766 ASME SB408 ASTM B407 ASTM B408 ASTM B409 ASTM B775 UNS N08810

Applications Ammonia Effluent Coolers Furnace Components Heat Exchangers Process Pipes

Stands out good resistance to oxidation and carburization at high temperatures Moderate resistance

Incoloy 800 Round Bars Specification

Detail: ASTM B 408 / ASME SB 408, AMS 5766

Measurements: ASTM, ASME, and API

Size: 5mm to 500mm diameter in 100mm to 6000mm length accessible with NACE MR 01-75.

Length: 100mm to 3000mm long and more

Finish: bright, polished, and black

Grade: Incoloy 800 – UNS N08800

Structure: Round, Square, Hexagonal (A / F). Rectangle, Wire (Coil Shape), Wire Net, Billet, Ingot, Forging, etc.

Our Incoloy 800 round bars conform to NACE MR0175 / ISO 15156

About

We are one of the leading manufacturers of optimum quality Pipes & Pipe Fittings. Their high tensile strength, seamless finish and resistance to corrosion, make these pipes highly demanded.

Register Office

Office No. 14, New Hira Building, 1st Parsiwada Lane, Girgaon, Mumbai – 400004, Maharashtra, India

Contact

(+91) 7977916074
(+91) 9167472806
[email protected]
[email protected]

Copyright 2021 © Apexia Metal – All Rights Reserved || Developed & Maintained by Adsense Networks