CARBON STEEL THREADED FLANGES

CARBON STEEL THREADED FLANGES MANUFACTURER

The Apexia Metal Is Provide Hardened Steel Threaded Flanges. Steel Threaded Flanges, ASME B16.5 CS Threaded Flanges Suppliers

Nickel Alloy Threaded Flanges. Duplex Steel Threaded Flange Exporter, Leading SS Threaded Flange Manufacturers.

Bolt-on ribs are not appropriate for conditions including. temperature or under cyclical conditions. or bowing distresses where spillage through the strings can occur. Threaded flanges are used for unmatched applications. They will be harvested without welding and. can be used in extremely high press factor administrations. in the barometric or contiguous press factor. where composite steel is required for power.

ANSI / ASME B16.5 Threaded / Bolted Flange Specification

Size: 1/2 “(15NB) to 48” (1200NB)

Standards: ANSI B16.5, ANSI B16.47 Series An and B, MSS SP44, ASA, API-605, AWWA, Custom Drawings

Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.

Spine Face Type: Flat Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

BS: BS4504, BS4504, BS1560, BS10

CARBON STEEL THREADED FLANGES  , CARBON STEEL THREADED FLANGES  MANUFACTURER, CARBON STEEL THREADED FLANGES  MANUFACTURER IN INDIA, CARBON STEEL THREADED FLANGES  SUPPLIER, CARBON STEEL THREADED FLANGES  SUPPLIER IN INDIA

CARBON STEEL THREADED FLANGES MANUFACTURER IN INDIA

Noise: DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628. DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673

Our bolted / threaded flanges conform to NACE MR0175 / ISO 15156

Bolt / Threaded Flange Material and Grades

Bolted / Threaded Hardened Steel Flanges:

ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L

Bolted / Threaded Amalgam Steel Flanges:

ASTM / ASME A / SA 182 and A 387 F1, F5, F9, F11, F12, F22, F91

Carbon Steel Bolted / Threaded Flanges:

ASTM / ASME A / SA 105 ASTM / ASME A 350, ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F70, ASTM A350, LF2, LF3

Bolted / Threaded Duplex and Super Duplex Steel Flanges:CARBON STEEL THREADED FLANGES

ASTM / ASME A / SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61, 2205 (UNS No. S31803), 2507 (UNS No. S32750)

Copper Steel Bolted / Threaded Flanges:

ASTM SB 61, SB62, SB151, SB152 UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu – Ni-90/10), C 71500 (Cu – Ni -70/30)

Bolted / Threaded Nickel Alloy Flanges:

ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020).

Mild Steel ASTM A182 F316 / 316L / 316H Threaded Flange, Monel ASTM A182 400 / K500 Threaded Flange. Nickel 200/201 Threaded Flange. ANSI B16.5 ASTM A182 Inconel 600/601/625 Threaded Flange. Incoloy 800 / 800H / 800HT Threaded Flange, titanium Gr1 / Gr2 / Gr5 / gr11 Threaded flange. SS ASTM A403 WP-S / WP-W / WP-WX Threaded flange, SS ASTM A403 309S / 310S / 317L Threaded flange.

steel ASTM A234 WPB, WPBW Threaded flange, steel A234 WPHY 42 / WPHY 46 / WPHY 52 Threaded flange. duplex steel ASTM A182 F44 / F45 / F51 Threaded flange. duplex steel ASTM A182 F53 / F55 / F56 Threaded flange, steel F11 / F22 / F91 Threaded flange

Threaded line spines are fairly rare ribs that can be attached to the road without welding. The strung spines are strung inside the drag that is coordinated with a rope outdoors on the road. Threaded line ribs are almost like slip-on pipe ribs used. with pipes that have external strings. It is used where little width and high press factor are required. These ribs are fully accessible in materials, details, sizes, and qualities.

CARBON STEEL THREADED FLANGES  , CARBON STEEL THREADED FLANGES  MANUFACTURER, CARBON STEEL THREADED FLANGES  MANUFACTURER IN INDIA, CARBON STEEL THREADED FLANGES  SUPPLIER, CARBON STEEL THREADED FLANGES  SUPPLIER IN INDIA

CARBON STEEL THREADED FLANGES SUPPLIER

Threaded Flange Key Features:

No soldering required

Useful for smaller line sizes

You should stay away from the biggest streets

Threaded Flange Applications:

It is usually installed in lines of various sizes without welding.

Used in surprisingly high-pressure factor applications

Prudent and efficient team

Can be used in applications where welding is hazardous

The spines of the strung line commonly have a raised face, a level face, or an RTJ confrontation. If a raised face is ideal for stringing spines. the quality height is 1/16 “for stringing ribs below 400 #. For stringing ribs 400 # and above, the height of quality strung line rib raised face is 1/4 “.

CARBON STEEL THREADED FLANGES SUPPLIER IN INDIA

CARBON STEEL THREADED FLANGES  detail

Strung flanges (bolt-on ribs) are like sliding spines in design. however the drag is strung, this way allows for pickup without welding. This restricts its application to somewhat low-pressure factor pipeline frames. Strung flanges can be welded around the joint after joining. however, this is not considered. an acceptable technique for expanding rib pressure factor applications.

B16.5 150 lb Threaded Flange

B16.5 300 lb Threaded Flange

600 lb Threaded Flange B16.5

900 lb Threaded Flange B16.5

1500 lb Threaded Flange B16.5

2500 lb Threaded Flange B16.5

Representation of threaded flange, screwed flange

Type: CARBON STEEL THREADED FLANGES / Cast Flange

Material: Carbon Steel: A105, SS400, SF440 RST37.2. S235JRG2, P250GH, C22.8, Stainless Steel: F304 F304L F316 F316L 316Ti, Copper onwards

Standard: ANSI, JIS, DIN, BS4504, SABS1123, EN1092-1, UNI, AS2129, GOST-12820

Size: 1 / 2-78 inches (DN15-DN2000)

Pressure factor: ANSI class 150,300,600,1500,2500, DIN PN6, PN10, PN16, PN25, PN40, PN64, PN100, PN160

Pressing: Do not fumigate or fumigate plywood/pallet or wooden box

Surface treatment: anti-rust oil, transparent / yellow / black anti-rust paint, zinc, hot-dip galvanized.

Electronic Inventory – Available, If Not Excessive Amount Of Issues Visit Ribs List

Usage: oilfield, offshore, water system, shipbuilding, gas, electric power, pipeline projects onwards

Dimensional standards for flanges

American standard flanges (ANSI / ASME / AWWA)

German standard flanges (DIN)

European standard flanges (EN)

Japanese Standard Flanges (JIS)

English Standard Flanges (BS)

MSS standard flanges (MSS-SP)

Gasoline Standard Flanges (API)

Russian standard flanges (GOST)

South African Standard Flanges (SABS / SANS)

Grades

Carbon Steel Flanges

Treated steel flanges

Duplex flanges

Very duplex flanges

Inconel Flanges

Hastelloy Flanges

Monel Flanges

Titanium flanges

254 SMO flanges

Applications

Oil and gas

Petrochemical refineries

Pipeline transmission

Manufacture of puree and paper

Exploration and development

Plumbing

Submarine

Flange types

Weld neck flange

Slip-on flange

Attached weld flange

Threaded flange

Lap joint flange

Stunning flange

Exceptional pipe flanges:

Opening flange

Long Weld Neck Flange

Decreasing flange

Expansion flange

No flange

Peak flange

Weldo flange

Spades and ring spacer

Show flang

These strings help the rib to conform to a line. which will therefore have a lot of coordination with male strings.

The strung backbone is used in atomic force or heavy oil treatment facilities. In addition to being easy and. convenient association device, keep in mind that. a steel spine with strings is not particularly. suitable to perform well in companies that. have a high heat setting and pressure factor.

A reduction rib is an exceptional type of rib that is used as often as possible on projects. require associations of varied measurement lines. A chrome-plated steel threaded taper flange is made up of a rib with a predefined dimension. where the resistance dimensions are of an alternative and smaller distance.

About

We are one of the leading manufacturers of optimum quality Pipes & Pipe Fittings. Their high tensile strength, seamless finish and resistance to corrosion, make these pipes highly demanded.

Register Office

Office No. 14, New Hira Building, 1st Parsiwada Lane, Girgaon, Mumbai – 400004, Maharashtra, India

Contact

(+91) 7977916074
(+91) 9167472806
[email protected]
[email protected]

Copyright 2021 © Apexia Metal – All Rights Reserved || Developed & Maintained by Adsense Networks